Mining software

PhoenixMiner 4.9c - Support for AMD Radeon RX 5500 XT Graphics Cards

In the current version of PhoenixMiner 4.9c, developers have added support for AMD Radeon RX 5500 XT graphics cards. Compared to another popular miner from Claymore`s, this miner can offer slightly higher performance with a lower commission of 0.65% instead of 1%. In addition to the Ethash algorithm, Ubqhash, ProgPow (BCI) and dual mining with Blake2s algorithm are available. Download the latest version of PhoenixMiner at Bitcointalk.org.

Gminer 1.87 - Kadena cryptocurrency mining on AMD graphics cards

gminer kadena blake2s amd miner In the next update of Gminer 1.87, the possibility of mining with AMD video cards based on the Blake2S or Kadena algorithm is added. For mining, AMD video cards with 4Gb video memory are suitable. The hashrate of RX480 / RX580 video cards is 390-420Mh/s with an energy consumption of about 100W. This miner also supports dual mining ETH + KDA, but so far only for Nvidia video cards. The commission for using Gminer on the Blake2s algorithm is 2%. You can download the miner on GitHub.

Lolminer 0.9.4 - added Cuckatoo32 algorithm, improved hashrate for Cuckatoo 31

lolminer v093 grin31 grin32 cuckatoo32 Lolminer 0.9.4 claims support for the new Cuckatoo32 mining algorithm, which Grin should switch to in February 2020. The minimum requirements for Cuckatoo32 8Gb video memory. But until the change of algorithm has occurred for miners, it will be more relevant to increase the hashrate of AMD video cards for the current Cuckatoo31 algorithm. For Vega video cards, the performance on the Cuckatoo31 algorithm is increased by 7%, for Navi video cards by 12%. Currently, Lolminer in version 0.9.4 is available only for linux. You can download Lolminer on GitHub.

XMRig 5.3.0 - added MSR mode to increase the hash rate on the RandomX algorithm by 5-10%

xmrig-53_msr_mode_windows XMRig 5.3.0 added support for the Windows MSR mod with which you can achieve an increase in hashrate by 5-10% on Intel and AMD processors using the RandomX algorithm. In order for the MSR mode to work, the miner needs to be run with administrator rights. XMRig modifies Windows using the allowed WinRing0 driver. For Linux XMRig, in addition to MSR, the mod also offers 1Gb Huge Pages, which additionally gives 2-3% performance. Download the latest version of XMRig on GitHub.

NoncerPro Kadena Miner - Kadena cryptocurrency mining (KDA) on Nvidia and AMD video cards

NoncerPro Kadena Miner is a specialized miner for the Blake2s-Kadena algorithm or just Kadena. The program supports two types of video cards at the same time: Nvidia and AMD. The commission for using the program is 2%. You can calculate the profitability of mining Kadena currency cryptocurrency on the website Minerstat.com. Download the latest version of NoncerPro Kadena Miner on Github.

XMRig 5.1.0 - increased hashrate of the CPU on the RandomX algorithm (Monero)

xmrig-510 randomx mining hashrate cpu The Monero hard fork on November 30 and the change of the mining algorithm to RandomX made significant changes among miners, as with Monero, all video cards and ASICs had to leave, and they were replaced by the CPU again. In the first days after the hard fork, owners of powerful modern central processors, especially Ryzen, were able to get significant income from their CPU. Although the income from the CPU has significantly decreased compared with the first days, it still remains relevant. Actually this is why the developers of the XMRig miner released a new version 5.1.0 in which the performance of intel processors was increased by 6-7% for the RandomX algorithm and by 2-3% for AMD processors. In addition to RandomX, a similar increase in hashrate mining algorithms based on RandomX: RandomXL, RandomARQ, RandomWOW. Recall that for effective mining Monero processors must have at least 2Mb of memory cache per thread. Download XMRIG on GitHub.

Gminer 1.81 - added support for the Cortex algorithm for Nvidia video cards

gminer-1-81 cortex algorithm Gminer in version 1.81 added support for a new mining algorithm called Cortex, used in the CORTEX cryptocurrency of the same name. To mine Cortex, you need a video card with at least 8Gb of video memory. For the new algorithm, the commission is a decent 5%, because it is now the only miner with Cortex support for Windows. For other algorithms, the commission is 2%. Also in this version, support for the Ethash algorithm is expanded, cryptocurrencies are now available for mining: Pirl (PIRL), Callisto (CLO), Metaverse (ETP) and Expanse (EXP). You can download the miner on GitHub.

Lolminer 0.9.1 - improved performance of AMD video cards with 4Gb and 16Gb on the GRIN31 algorithm

The next lolminer 0.9.1 update improves the performance of AMD video cards with 16GB (RX580 16Gb, Vega 7, Vega FE) and 4Gb (RX570, RX580). Also added support for the new generation of RX5700 graphics cards. By updating the miner you can get the following hashrate: Radeon 7 - 1.7G/h, Vega FE - 1.3G/h, Vega64 - 1.15G/h, Vega56 - 1.05G/h, RX5700 - 0.85G/s, RX580 8Gb - 0.55G/h, RX580 4Gb - 0.43G/h. As before, the miner takes a commission of 1%, you can download it on GitHub.

Lolminer 0.9 - plus 30% hashrate of AMD Video Cards for the Cuckatoo31 Algorithm (GRIN31)

lolminer_v09_grin31 Lolminer developers have released the next version 0.9, which significantly increases the capabilities of AMD video cards with 8Gb of video memory for the mining algorithm Cuckatoo31 or GRIN31. The performance increase is from 22% for Polaris video cards and up to 30% for Vega7, which is close to the GTX1080ti, Vega 64 is now significantly superior to its eternal rival GTX1070. Lolminer provides the following performance: RX480 4Gb - 0.27G/s, RX580 8gb - 0.55G/s, Vega 64 - 1.2G/s, Vega 7 - 1.53G/s. You can download Lolminer on Github. The commission for using the miner is 1%

ETH and Eaglesong dual mining (Nervos CKB) on AMD and Nvidia graphics cards

nrvos ckb eaglesong dual mining A few days ago, the main network of the Nervos CKB cryptocurrency using the Eaglesong mining algorithm was launched. Because The Nervos cryptocurrency itself received a fairly large response in the cryptocurrency community, miner developers did not stand by and released mining software, first with support for one Eaglesong algorithm, and then with support for Ethereum and Nervos dual mining. At the moment, there are only two miners supporting dual mining ETH + CKB: NBMiner 26.1 and GMiner 1.75 moreover, for owners of AMD video cards the choice will be one towards NBminer, as Gminer for dual mining only supports Nvidia graphics cards. However, owners of Nvidia video cards should also pay attention to NBminer, as It shows slightly better performance.

MiniZ 1.5s - increased hashrate for ZelHash, Beam2 and Zhash algorithms

miniz 15s mining beamhash2 zelhash Zhash MiniZ is notable for its good performance on Equihash algorithms of various modifications for Nvidia video cards. In the next update, MiniZ 1.5s can offer even better optimization for ZelHash, BeamHash2 and Zhash algorithms, which increases the hashrate of video cards on these algorithms up to 3%. In the current version, the developers removed the support for the Nvidia video cards of the Kepler generation (GTX680), which were released back in 2012 through the 28nm process and currently do not represent much value for cryptocurrency mining. You can download the latest version of the MiniZ miner on the official Miniz.ch website. The commission for using the miner is 2%.

Gminer 1.74 - improved performance on the Cuckatoo31 algorithm (GRIN31)

gminer-174 grtin31 hashrate In the latest version of Gminer 1.74, the performance of Nvidia graphics cards on the Cuckatoo31 mining algorithm was improved by about 5-10%. For best results in mining on this algorithm, it is not recommended to use Windows 10; instead, it is better to use HiveOS or older versions of Windows 7 (8.1). We also note that to start mining GRIN31, you need at least 8Gb of video memory, i.e. GTX1660, GTX1060, and RTX2060 graphics cards will not work. Also, over the past few versions, developers have added support for the Ethash and Eaglesong algorithm to Gminer, which did not bring anything new compared to other popular miners. You can download Gminer on Github.

Claymore`s Dual Ethereum Miner requires a mandatory update

Claymore`s Dual Ethereum Miner is very popular among miners Ethereum, Ethereum Classic and other cryptocurrency miners using the Dagger-Hashimoto algorithm. As you know, one of the features of this algorithm is the ever-increasing DAG file with each new epoch. For Ethereum, the current 296 epoch, and for Ethereum Classic, the 303 epoch. And just the ETC miners have already encountered such a problem as limiting support for epoch above 299 for Claymore`s Dual Miner versions 14 and below. Those with the transition to the 300 era, the old versions of the miner cease to work. To avoid downtime of mining equipment during the transition of Ethereum from 299 to the 300 epoch, it is imperative to update your miner to the latest version of Claymore`s v15.0, which, in addition to the ability to change memory timings, also got rid of the mining limit for the 299 epoch. In addition to Claymore`s, you can switch to the second most popular Phoenix miner, which was originally devoid of such restrictions.

Nvidia Geforce GTX1050Ti 4Gb - solving CUDA error 11 - cannot write buffer for DAG when mining Ethereum

gtx1050ti_CUDA_error_cannot_allocate_big_buffer_for_DAG Owners of Nvidia Geforce GTX1050Ti video cards with 4Gb video memory begin to face the problem of running out of this memory when creating DAG files in Windows 10. Moreover, the DAG file itself has a size of 3.3 Gb at the beginning of November 2019, which is significantly less than the available 4Gb. This problem has been known for a long time and is associated with Windows 10, which utilizes a lot of video memory. Solutions to this problem have also been well known since the DAG file was approaching 2Gb and 3Gb sizes. Next, we consider all the options that are available to extend the work of video cards with 4Gb GDDR memory on the Ethereum cryptocurrency mining.

WildRig Multi 0.20.0.2 - support for MTP and MTP-tcr algorithms

wildrigmulti_20_2 amd mining mtp The popular miner for AMD WildRig Multi video cards in version 0.20.0.2 has acquired support for the MTP and MTP-tcr algorithms, including for the RX5700 and RX5700XT video cards. The Radeon RX5700XT on the MTP algorithm at undervolting shows 2.8MH/s at 155W, which corresponds to the level of the Nvidia Geforce RTX2060 graphics card. As before, the miracle did not happen, because Nvidia video cards, as before with the MTP algorithm, have an undeniable advantage. WildRig Multi takes a 2% commission, you can download the latest version on GitHub.

Miniz 1.5r - increased hashrate for ZelCash algorithm (Equihash 210-9)

miniz-15r In the latest version of MiniZ 1.5r, in addition to improving stability, the developers also announced an increase in the performance of Nvidia video cards based on the ZelCash (Equihash 210/9) mining algorithm by 7%. Apart from Equihash 210/9, Miniz also supports other modifications of Equihash, while on almost all supported algorithms Miniz will be the best choice for owners of Nvidia video cards. You can download the latest version of the miner on the Miniz.ch website.

SRBMiner-MULTI CPU & AMD GPU Miner 0.1.1 joint GPU + CPU cryptocurrency mining

srbminer-multi GPU+CPU майнинг The developer of the popular SRBMiner-CN miner for mining Cryptonight cryptocurrencies on central processors has released a new miner - SRBMiner-MULTI CPU & AMD GPU Miner, which also supports GPU mining, but only AMD video cards starting with GCN 2.0. Joint CPU + GPU mining is supported on the following algorithms: blake2b, eaglesong, keccak, mtp, rfv2, yescrypt. Only CPU mining is available for the CPUPower algorithm and various variations of Yescrypt algorithms. The fee for using the miner depends on the algorithm and ranges from 0% to 1.75%. Download SRBMiner-MULTI CPU & AMD GPU Miner on GitHub.

Wild Rig Multi 0.19.3 - support for the X16rv2 algorithm, RX5700 graphics cards and VEGA 11 (Gfx902) integrated graphics cards

wildrig_multi_019 The popular miner for the "red video cards" Wild Rig Multi in the latest versions with a long delay has acquired support for the X16rv2 algorithm for mining the Ravencoin cryptocurrency. Another important innovation is the availability of support for Vega 11 graphics cards (GFX902) integrated in the Ryzen 5 CPU 2400G and 3400G. Limited support (not for all mining algorithms) of the new generation of AMD graphics cards based on the RDNA architecture - Radeon RX5700 and RX5700XT, is also announced. The commission for using the WildRig Multi miner is 2%. Download the latest version on GitHub.

Gminer 1.67 - increased hashrate of Nvidia RTX video cards for Cuckarood29 algorithm

gminer167_cuckarood29 rtx hashrate boost Gminer 1.67 - offers increased performance for Nvidia RTX video cards based on the Cuckarood29 algorithm (GRIN cryptocurrency). In the previous version of Gminer 1.66, all Nvidia video cards gained a 10% hashrate on this algorithm, so all owners of Nvidia RTX series video cards must necessarily update Gminer to the current version. Gminer is a universal miner for several mining algorithms with support for AMD and Nvidia graphics cards. The commission for using the software is 2%. You can download the latest version on GitHub.

Hardfork Ravencoin cryptocurrency October 1, 2019 - GPU miners with support for the mining algorithm X16rv2

ravencoin_x16rv2 miner gpu support A few days later, a hard fork will take place on the Ravencoin cryptocurrency network (RVN), which will bring with it a new mining algorithm X16rv2 instead of the original X16r, which is currently not relevant for GPU mining due to FPGA and ASIC devices. On October 1, video card owners will again have the opportunity to get a small increase in mining income and the upcoming Ravencoin hard fork, which will be held on October 1 at 16.00 UTC. To take advantage of this opportunity, you need to download and configure miners that support the new mining algorithm X16rv2 in advance or even better, an automatic transition from X16r to X16rv2. To do this, we have selected for you several options for such miners for Nvidia and AMD video cards:

Mining soft

Links and Projects

Bonuses and Partners

Recomended

Crypto F.A.Q

Popular