Mining software

TeamRedMiner 0.5.8 - added Chukwa-512 algorithm (Turtlecoin)

In the latest version of TeaRedMiner 0.5.8, in addition to the next optimization of all supported algorithms for AMD video cards with GCN architecture, support for the Chukwa-512 mining algorithm for mining the Turtlecoin cryptocurrency has appeared. Thus, TeamRedMiner began to support 21 types of various mining algorithms relevant to date. The development commission for using this software is 2.5% with rare exceptions, where the commission is 3% (PHI2 and Lyra2z). You can download TeamRedMiner on GitHub.

Phoenix 4.6c and RX5700XT = 61MH/s and 105W on Ethash algorithm

rx5700XT_mining Recently, we have already cited the results of testing the latest AMD Radeon RX5700XT video cards in mining Ethereum cryptocurrency using Claymore`s Dual Ethereum Miner 15.0. But since then, several versions of the Phoenix miner have appeared with optimizations for these video cards, therefore, testing the AMD Radeon RX5700XT on the latest version of Phoenix 4.6c gave an excellent result, improving the results of the miner from Claymore by 15%, while the power consumption of the video card itself also decreased.

NBminer 25.1 - supports Eaglesong algorithm for AMD and Nvidia video cards

nbminer_eaglesong_nervos_mining NBMiner was primarily released as a miner for Nvidia video cards, but in the latest version 25.1, not only Nvidia's video cards, but also AMD received support for the new Eaglesong algorithm (Nervos or CKB cryptocurrency). A distinctive feature of this algorithm is the ability to combine it with Ethash. In other words, using NBMiner, dual mining CKB + ETH is available, which will improve your mining profitability. Because The eaglesong algorithm itself requires only 0.1 GB of video memory, so you should not expect a serious drop in the Ethash hash with dual mining. NBMiner charges a commission of 0.65% for Ethash, 2% for Eaglesong and 3% for dual mining ETH + CKB. You can download the latest version of NBMiner on GitHub.

AMD Adrenalin 2019 Edition 19.9.1 - reveals the potential of Radeon RX5700 graphics cards in mining

amd_radeon_software_adrenalin_2019_edition_mining As promised by the author of the miner Clamore`s Dual Miner, with the release of the corrected drivers, the AMD Radeon RX5700 and RX5700XT video cards will show significantly better mining results. Actually, with the release of AMD Adrenalin 2019 Edition version 19.9.1, the performance of these video cards based on the Ethash mining algorithm has grown by more than 10 times compared to previous results.

Gminer 1.60 - Equihash 144/5 mining algorithm is available for AMD video cards

gminer_160_zelcash_amd_mining Gminer in version 1.60 for the mining algorithm Equihash 144/5 (Zelcash) began to support AMD video cards in addition to the already supported Nvidia. But unfortunately the performance of AMD video cards on this algorithm is significantly lower than that of Nvidia: RX570-24Sol/s, RX580-27Sol/s, Vega 64 -43Sol/s. In addition, the hashrate for Equihash 144/5 and 192/7 has been slightly improved for Nvidia RTX video cards. Gminer is a closed source software with a commission of 2%; Windows and Linux versions are available for download on GitHub .

Claymore`s Dual Ethereum Miner 15.0 - implemented support for AMD Radeon RX5700 (XT) Navi video cards

claymore_amd_navi_rdna_ethash Claymore`s Dual Ethereum Miner, popular for Ethereum mining, has been updated to version 15, the main difference of which is support for the new generation of AMD NAVI video cards: Radeon RX5700 and Radeon RX5700XT. But this fact only says that the specified miner can only start on these video cards, because Prior to this, only the Phoenix 4.2 miner could boast of this. Read more about the first mining experience on AMD Navi video cards here.

Lolminer 0.8.7 - BEAM mining on old AMD R9 graphics cards series 79x0, 200, 300 with 3Gb or more

lolminer-087-beam2_amd_old_card Lolminer in the latest version 0.8.7 added support for BEAM cryptocurrency mining with the new BeamHash2 algorithm on older AMD R9 video cards of the 7900, 200 and 300 series with a video memory capacity of at least 3Gb. But given the fact that owners of Nvidia video cards won more from BEAM hard fork than AMD due to a greater increase in hashrate on the new algorithm, the use of outdated AMD video cards in BEAM mining on 28nm process technology will not bring much benefit. You can download lolminer on GitHub.

Gminer 1.55 - support for BeamHash2 and GRIMM

gminer155 GRIMM In recent versions, Gminer has added support for the BeamHash2 algorithm for AMD video cards and the GRIMM cryptocurrency (combining Equihash and MimbleWimble) for Nvidia and AMD. The latest version of Gminer 1.55 - improved support for automatic pool switching for the Beamhash2 algorithm. Gminer is a closed source software with a development commission of 2%. Download the latest version of Gminer on GitHub.

Z-enemy 2.1 - performance gain of 4-5%

z-enemy_2-1 nvidia miner Popular for Nvidia video cards, the Z-enemy multi-miner has been updated to version 2.1, which has announced performance improvements for most of the supported mining algorithms (x16r, x16s, x17, hex, bitcore, bcd and others) by 4-5%. Z-enemy can be used with Linux and Windows, 1% is taken for use. Download Z-enemy 2.1 on the Bitcointalk forum.

cpuminer-opt 3.9.6.1 - added support for 6 new algorithms

cpuminer-opt_3.9.6 The well-known processor miner continues to develop rapidly, increasing the number of supported mining algorithms on processors. In the last two versions 3.9.6 and 3.9.6.1, 6 algorithms were added: X21s, hex, bmw512, x16rt, x16rt-veil, x13bcd. Currently, cpuminer-opt supports 86 different mining algorithms on central processing units. The minimum processor requirements are SSE2 support instructions. The miner also supports the AES_NI, AVX and AVX2 instructions, which will allow processors with the support of these instructions to get a much higher result on some mining algorithms. From operating systems, only Linux and Windows are available. Download cpuminer-opt at GitHub

Yenten GUI CPU miner 07-1 - mining cryptocurrency Yenten, CranePay, Uranium-X, CPUchain on processors

yenten_GUI_CPU_miner Yenten GUI CPU miner exists for a little more than a month, but is still in the beta testing stage, which does not prevent it from constantly expanding the functionality. By version 07-1 of the CPU, the miner got support for the algorithms yespower, yespower16, yespowerurx, cpupower. Those. With this software you will be able to mining cryptocurrency Yenten, Cranepay, Uranium-X, CPUchain on your processors. Miner has a convenient graphical interface, supports only Windows X64 starting with Windows 7. By the size of the commission, we did not find any information; you can download the Yenten GUI CPU miner on GitHub.

Bminer 15.7.3 - mining available Cuckarood29 for video cards with 5Gb of memory

bminer-15-7-2 cuckarood29 The Bminer developers did not stand aside from the GRIN hard forks, with which the new mining algorithm Cuckarood29 appeared, and released, like all competing miners, the new version 15.7.0 with the support of this algorithm. By version 15.7.3 on Bminer, not only the performance of the Cuckarood29 algorithm was improved, but also the possibility of mining GRIN on video cards with 5GB or more of video memory was added. Bminer supports AMD and Nvidia video cards, and is also available for both Linux and Windows operating systems. You can download the latest version of the miner on the Bminer.me website.

Gminer 1.52 - improved performance on Equihash 144/5 and 192/7 algorithms, but only for Nvidia RTX cards

gminer-152-equihash 144/5 Equihash 192/7 Gminer 1.52 can offer the latest generation Nvidia RTX video card improved performance on Equihash 144/5 (Bitcoin Gold, BitcoinZ, Anon, Bitherium, litecoinz) and Equihash 192/7 (Safecoin, Genesis, Vidulum, Zero) algorithms. The developer’s commission for using the miner is 2%, you can download Gminer 1.52 for Linux and Windows on GitHub.

TeamRedMiner 0.5.6 - improved hash rate and efficiency of Vega, Polaris video cards on the MTP algorithm

teamredminer_amd_MTP_improve In the latest version of TeamRedMiner 0.5.6, developers managed not only to raise the hashrate on the MTP algorithm, but also to increase the energy efficiency of video cards during mining on this algorithm. At the same time, the hashrate grew slightly by 1-3%, and to a greater extent these changes will be noticed by the owners of RX480/580 video cards. TeamRedMiner takes a commission from 2.5% to 3% depending on the algorithm. You can download the latest version on GitHub.

Gminer 1.51 - support for mining algorithms Cuckarood29 and BeamHash2

gminer-151-cuckarood29-beamhash2 In anticipation of the GRIN hard forks, to be held today on July 17 at block 262080, the Gminer developers released a new version 1.51 with the support of the updated mining algorithm Cuckarood29 (GRIN29). GRIN29 mining is available for AMD and Nvidia video cards, which cannot be said about the second added BeamHash2 algorithm, since it will be available only for Nvidia video cards. The BeamHash2 mining algorithm will support the BEAM cryptocurrency after its hardfork on August 15, 2019. The miner supports automatic switching to the new algorithm for GRIN and BEAM. Download the latest version of Gminer on GitHub.

NBminer 24.0 - support for Cuckarood algorithm (GRIN cryptocurrency after hardfork on July 17)

nbminer-24-grin-cuckarood-progpow-sero In the last 24 version of NBminer, the developers made quite a few changes, the main one being the support of the Cuckarood mining algorithm, in which the GRIN cryptocurrency goes after hard forks on July 17, 2019 in block 262080. Cucackarood will replace Cuckaroo27, with the second mining algorithm from GRIN - Cuckatoo31 will remain unchanged. The miner has an automatic transition from Cuckaroo27 to Cuckarood, so you don’t need to worry about it. Mining cryptocurrency hashrate GRIN and Aeternity has also been improved. Another innovation is the addition of support for the ProgPow-sero algorithm (cryptocurrency SERO 13MH/s on the GTX1070). Added parameter -intensity to manually adjust the intensity for each video card. You can find out about all the other changes in the current version of NBminer on Github.

TeamRedMiner 0.5.5 - mining on the Cuckatoo31 algorithm using AMD video cards

teamredminer_amd_grin31 TeamRedMiner in the new version 0.5.5 received support for the mining algorithm Cuckatoo31 (cryptocurrency GRIN). To start mining GRIN31 you need a video card with 8GB of video memory. Video card Vega 56 gives 0.9 - 1.0 H/s, Vega64 - 1.1-1.3H/s, Vega 7 - 1.25-1.4H/s, RX580 8Gb - 0.5-0.6H/s depending on overclocking and memory latency. You can calculate profitability for your video cards on the website Profit-mine.com. TeamRedMiner itself charges 2.5% commission for using. Download on GitHub miner is possible for Windows and Linux versions.

CryptoDredge 0.20.2 - improved hashrate on algorithms Argon2d, MTP, X16

cryptodredge-0-20-2-argon2d-mtp-x16r In the next miner update for Nvidia Cryptodredge 0.20.2 video cards, performance has been improved for MTP, Argon2d and all X16 variations (X16r, X16s, X16rt, X21s). In this case, an increase in the hashrate on the MTP algorithm will be noticed only by owners of Nvidia Turing video cards. In total, the miner supports 31 different mining algorithms, which makes it one of the most versatile solutions. The commission for using the software is 1%, except for the MTP algorithm, where the commission will be 2%. You can download the latest version of the miner on the Bitcointalk forum.

TeamRedMiner 0.5.3 - began to support the MTP (Zcoin) mining algorithm for AMD video cards

teamredminer_053_AMD_radeon_mining_zcoin_MTP. Just a few hours ago, a new version of AMD miner TeamRedMiner was released under the designation 0.5.3, the main innovation of which is the support of the mining algorithm MTP cryptocurrency Zcoin. To start Zcoin mining, a minimum of 4.4 Gb of video memory is required, therefore video cards with 4Gb of memory on board will not be suitable for this purpose. The AMD Radeon RX580 8G on the MTP algorithm shows a hashrate around 1.6MH / s, Vega 56 - 2.5Mh / s, and Vega 64 - 2.8Mh / s. At the same time, video cards use the maximum power consumption limit, or in other words, the algorithm turned out to be very hot, and even the authors of the miner themselves warn about it. In the folder with the miner there is a special text file MTP_MINING.txt which talks about overclocking video cards and their mandatory down-voltting before running the miner on the MTP algorithm. Download TeamRedMiner 0.5.3. can be on GitHub.

Gminer 1.49 - increased hash rate on Equihash 150.5 and Equihash 125.4 algorithms for Nvidia Geforce RTX video cards

ann_gminer_1_49_BEAM_equihash The updated Gminer to version 1.49 proposes an increased hash rate on Equihash 150.5 (BEAM) and Equihash 125.4 (ZelHash) algorithms by 1-3%, but only for the latest generation of Nvidia RTX video cards. In addition to the already mentioned algorithms, Gminer supports 9 more, and for some of them mining is available for AMD and Nvidia simultaneously. Two versions of Windows and Linux are available for download, with a 2% commission. You can learn more about Gminer and the available hashrate on Bitcointalk.

Mining soft

Links and Projects

Bonuses and Partners

Recomended

Crypto F.A.Q

Popular