Select your language

 

 

Mining soft

  • teamredminer_5_2TeamRedMiner is the second most popular miner for AMD video cards with support for 16 different mining algorithms (various varieties: cryptonight, X16, PHI2, Lyra2). In the latest version 0.5.2, support for the AMD Radeon Vega 7 graphics card has been improved: the display of HW errors has been fixed and 1-2% of the hashrate added on some algorithms. Depending on the mining algorithm chosen, the commission can vary from 2.5 to 3%. Download the latest version of TeamRedMiner at GitHub.

  • wildrig multi blake2b-btcc blake2b-gltUsing the miner WildRigMulti, which is popular for AMD video cards, it became possible to mine BitcoinX, TNET and GlobalToken cryptocurrency, because in version 0.17.5 WildRig Multi got support for Blake2b-btcc and Blake2b-glt mining algorithms. Commission for the use of software - 2%. You can download the latest version of miner on GitHub.

  • xmr-stack-2.10.5-cryptonight-gpu-ryoXMR-Stak is a specialized miner for all types of the Cryptonight mining algorithm, while Nvidia, AMD video cards and CPUs are supported. The latest version 2.10.5 improves miner's performance for the Cryptonight-gpu algorithm (RYO cryptocurrency) by 10% for Nvidia video cards and 3% for AMD video cards, although for AMD, increased performance is available only for Linux and ROCM drivers. The default miner contains a 2% commission in compiled files for Linux and Windows, but if you wish, you can change it to 0% before compiling. You can download XMR-Stak on GitHub.

  • t-rex_0111_x25x_sinovate_miningIn the T-rex multiminer for Nvidia video cards in version 0.11.0, support for the X25x algorithm for mining Sinovate cryptocurrency was added. In the next update, 0.11.1, the performance of the miner T-rex on the X25x algorithm was increased by 200%. Hashrate of video cards: GTX1070-3.6MH/s, GTX1080ti - 7.5MH/s, RTX2070 - 5MH/s, RTX2080 - 8.5MH/s. Miner is available for Windows and Linux, the commission for using a miner is 1%. You can download the latest version of the T-Rex miner on GitHub

  • cryptodredge-201_nvidia-argon2dThe multiminer for Nvidia video cards Cryptodredge  to version 20.1 got support for the new algorithm Argon2d (Dumb mode) with which you can mine the Nimig, UraniumX, Dinamic and ZumyCoin cryptocurrencies. Compared to the 19 version in the miner, the support of the MTP algorithm has been improved and the Watchdog for the Linux version of the miner has been added. Cryptodredge is available for Windows and Linux, you can download the latest version on the Bitcointalkforum.

  • nvidia gminer 1-45 grin29 hashrateGminer version 1.45 has improved support for mining algorithms GRIN29, AE, SWAP up to 4% compared to the previous version of this miner. Also, when switching to the new version, there is a slight decrease in the energy consumption of video cards during mining. Gminer supports 9 different algorithms and is only available for Nvidia video cards. Miner is available for Windows and Linux operating systems, you can download the latest version of Gminer on Github.

  • claymore-miner-146Over the last month, Claymore's Dual Ethereum Miner has been actively developing due to the expansion of the video memory overclocking functionality. Now, besides the frequency in the miner, you can set the timings through a special command strap and rxboost. However, only owners of mining rigs with Windows OS could take advantage of all this magnificence until today, as the version for Linux appeared only now in version 14.6. Moreover, the Linux version has limited functionality due to the non-working strap command, i.e. Only rxboost is available, which gives an additional 5% performance on AMD graphics cards. In addition to the appearance of Linux miner in version 14.6, the rxboost command became available for older models of AMD video cards (Hawaii, Tonga, Tahiti, Pitcairn), support for all versions of AMD drivers was also announced, statistics on balls (S command) and some other improvements appeared. Claymore's Dual Ethereum Miner 14.6 is available for download on the Bitcointalk forum.

  • gminer 1.43 V-dimension vellar miningIn the next version of Gminer 1.43, in addition to adding the ability to mine the V-Dimension (Vollar) cryptocurrency on the Equihash + Scrypt algorithm, added NiceHash support for the Aeternity cryptocurrency and optimized the Equihash 144/5, 192/7 algorithms for some Nvidia video card models. Gminer takes a 2% commission for use and is available for Windows and Linux OS. You can download the latest version of miner on GitHub.

  • t-rex-10-2-nvidia-minerWe have not seen updates of the popular Nvidia miner T-REX since February 2019, when version 9.2 was released. In the latest version, the authors added support for the MTP mining algorithm, slightly improved Watchdog and added support for one of the most powerful computational solutions from Nvidia - Tesla P100, which back in 2016 produced about 80MH / s on the Ethash algorithm. The T-REX miner itself is available for download on GitHub for Windows and Linux. In the miner embedded commission 1%

  • claymore-dual-ehereum-miner-14-2_Supercharged_EditionRecently, we already wrote that the popular mining miner Ethereum from Claymore`s got the ability to change the memory timings on AMD video cards for better performance on the ETHash algorithm. In version 14.2, the turn came to Nvidia's video cards. Now, using only one "strap" command, you can increase the performance of GTX1050, GTX1060, GTX1070 video cards by 10%, and video cards with HBM GTX1080 and GTX1080Ti memory by 50% or more percent. Previously, there was already such an opportunity to increase the hashrate with the help of the additional OhGodAnETHlargementPill program, but there was no possibility of more detailed parameter settings. Now this necessary option is built into the Claymore's Dual Ethereum miner, with 3 different modes available to you. At the moment, the miner works as a beta version and the function is available only for Windows in test mode, i.e. Windows must first be put into test mode using the special command bcdedit.exe -set TESTSIGNING ON. Download Claymore's Dual Ethereum v14.2 Supercharged Edition on Bitcointalk.

  • wildrig-multi-164 amd gpu mining Since the last time we wrote about AMD MultiMiner WildRigMulti version 15.5, almost a month passed, during which WildRigMulti was updated to version 16.4 and received many improvements and optimizations. Namely, support of the wildkeccak and xevan algorithm has been added, performance has been improved for honeycomb, bcd, hex, x22, X16 family algorithms, especially hash rate gain is noticeable for Vega video cards. WildRig Multi is available for download on Windows, Linux, HiveOS. You can download the latest version on GitHub , a 2% commission is built into the miner.

  • efudd_fuddware_config_antminer_z11Asic Miners from the company Bitmain with the original firmware do not imply the possibility of an independent increase in the frequency of operation of the chips, which would improve the performance of the asics. This feature allows you to implement third-party firmware for Asics. The Effad`s Fuddware firmware allows you to tune the Asmin series Antminer Z using Equihash algorithm. The latest version of Fuddware 2.3 supports Antminer Z11, the previous version 2.2 is for ANTminer Z9, and version 2.1d for Z9-Mini.

  • claymores_dual_miner_14 amd tweak memoryMining software Ethereum from Claymore`s is the most popular among miners for versatility, high stability and diverse functionality. Recently, in the direction of the development of the mining of cryptocurrency Ethereum, it was difficult to offer something new, so the update of the Claymore's Dual Ethereum AMD + NVIDIA GPU Miner was quite rare. The previous version 12 is dated as early as December 24, 2018, which reduced the commission and began to support Cuda 10 for greater performance of Nvidia RTX video cards. After version 12, the author immediately switched to version 14, skipping the number 13. In version 14, AMD video card owners will be able to change the video memory settings using the new -strap command without resorting to tedious work on changing the BIOS of video cards AMD.

  • cryptodredge19 argon2d nvidia minerFor Nvidia miner CryptoDredge there were no updates for more than a month, because the previous version 0.18.0 was released on April 4th. In the new 19 version of CryptoDredge, in addition to the appearance of the new algorithm Argon2d (Dinamic, UraniumX, ZumyCoin cryptocurrency), the miner got rid of the support of several mining algorithms that were not widely used at once. In addition, in the current version, CryptoDredge can offer an increased hash rate for the MTP and CryptoNight algorithms. Download the latest version of CryptoDredge and familiarize yourself with the available hashrate for Nvidia video cards on the Bitcointalk forum.

  • miniz-1-3n4 nvidia equihashMiniZ is a miner for Nvidia video cards with support for CUDA 8 (GTX series) and CUDA 10 (RTX series), allowing you to mine cryptocurrency on various variations of Equihash algorithms (144/5, 192/7, 96/5, 150/5). In performance, this miner is slightly inferior to the popular Gminer, but it can boast convenient and informative means of monitoring equipment operation via the built-in telemetry service. Any modern Nvidia video card with not less than 2GB of video memory will suit for inclusion in mining. Several versions of the miner for Windows and Linux are available for download, and the miner itself is only available with closed source code and a commission of 2%. You can download the MiniZ on the official website miniz.ch

  • gminer 1.40 beam hashrateIn the current version of Gminer 1.40, a significant increase in the performance of Nvidia video cards based on the Equihash 150/5 algorithm (BEAM) has been announced by approximately 25%. Mining BEAM is also available for AMD video cards, but the level of performance for these cards has remained the same. Gminer is distributed as closed source software, so you will have to pay a commission of 2% to developers for using the miner. You can download the latest version of Gminer 1.40 on the Bitcointalk forum.

  • wildrigmulti_15_noneycombAMD WildRigMulti miner continues to confirm its multi-miner name by adding more and more algorithms for mining cryptocurrencies. This time, WildRigMulti got support for the HoneyComb algorithm, which debuted on April 15, 2019, along with the BeeNode cryptocurrency. The mining program WildRigMulti supports only AMD video cards and is available for Windows and Linux systems. You can download the latest version on GitHub.

  • srbminer 1.8.4 amd radeon vega hasrate boostThe latest version of SRBminer 1.7.8 as well as TeamRedMiner  added the ability to change the memory timings HBM2 installed on AMD's Vega video cards. Unlike TeamRedMiner, in SRBminer, the timings can only be changed using the previously prepared Tweak Profile settings, which are only 5. The higher the Tweak Profile digit, the more aggressive memory settings will be used, which may not suit all video cards. The performance gain from using a new command can be from 9% to 18%, depending on the algorithm. SRBminer supports all known variations of the Cryptonight algorithm, starting with the very first debut with the Monero cryptocurrency. The commission for using the program is 0.85%, and it is available only for Windows platforms. Download SRBMiner on the Bitcointalk forum.

  • teamredminer vega boostTeamRedMiner 0.4.4 added the ability to change memory timings for AMD RADEON Vega video cards (56, 64 and 7) to its arsenal, which immediately gives you the opportunity to receive up to 20% more hash rate on various variations of the Cryptonight algorithm, as well as Lyra2Z, Lyra2Rev3 and PHI2 . You can manage the memory timings of your video cards yourself with the help of the new command --cn_config, by default this parameter is equal to --cn_config = 15 * 15. Because TeamRedMiner is distributed with closed source code, so there is a commission for use in the amount of 2.5% to 3% depending on the algorithm. You can download the latest version of miner on GitHub.

  • amdtweaktool_windowsEarlier, we wrote about the AMD Memory Tweak Tool, which allows you to change the memory timings of an AMD video card on the fly, but only for the Linux operating system. Such a function turned out to be quite popular among miners, since allows not only to save a lot of time in selecting the optimal parameters of the video card, but also to get a higher hashrate on almost all mining algorithms cryptocurrency. It is worth noting that, compared with the previous version, the author has removed support for HBM memory of the first version, leaving only HBM2 and GDDR5. You can download the AMD Memory Tweak Tool on GitHub, and you can find the appropriate settings for your video card on the Bitcointalk forum.