Mining soft

Gminer 1.34 - Support for the Cuckaroo29s SWAP cryptocurrency

In the next update of Gminer, in addition to supporting the Cuckaroo29s mining algorithm for the SWAP cryptocurrency, mining support for BEAM (Equihash 150/5) AMD was added, but only on the Linux version of the miner, and the productivity of the miner was increased by 5% for GRIN and Aeternity. Gminer is a miner with a closed source code and a commission of 2%, you can download the latest version on the Bitcointalk forum. 

NBminer 20.0 - Cuckatoo31 Grin support

NBminer immediately jumped from version 14 to version 20, in which mining became available on the Cuckatoo31 cryptocurrency GRIN algorithm. Previously, only Cuckaroo29 was available. When mining green, there is a new opportunity to select the load on the CPU. The support of the Nicehash pool for GRIN is also announced. The NBminer mining performance at GRIN is close to Bminer, which shows the highest results on this algorithm. NBminer only supports Nvidia video cards and takes a commission of 0.65% to 3% depending on the selected algorithm. Download the latest version of NBminer on Github.

NBminer перескочил сразу с 14 версии до 20, в которой стал доступен майнинг на алгоритме Cuckatoo31 криптовалюты GRIN. Ранее был доступен только Cuckaroo29. При майнинге грин появилась новая возможность выбора нагрузки на CPU. Так же заявлена поддержка пула Nicehash для GRIN. Производительность NBminer при майнинге GRIN близка к Bminer, который показывает на этом алгоритме самые высокие результаты. NBminer поддерживает только видеокарты Nvidia и берет комиссию от 0,65% до 3% в зависимости от выбранного алгоритма.  Скачать последнюю версию NBminer можно на Github.

Cryptodredge 0.17.0 - support for Cuckaroo29, CuckooCircle, CryptonightGPU, CryptonightTurtle

CryptoDredge multimedia for Nvidia video cards in the latest version 17.0 immediately added 4 new algorithms: Cuckaroo29 (GRIN), CuckooCircle (Aeternity), CryptoNightGPU and CryptonightTurtle. Since The currency of GRIN is of the greatest interest to the miners, so we will immediately inform you that the hash rate offered by this miner on the Cuckaroo29 algorithm is currently lower than that of the competitors Bminer and Gminer. Cryptodredge takes a commission of 1% and is available for Windows and Linux systems. You can download the miner on the Bitcointalk forum.

Bminer 15.0 - support for 8Gb cards on the algorithm Cuckatoo31 (except WIndows 10)

Bminer 15.0 can offer GRIN mining using the Cuckatoo31 algorithm on video cards with 8Gb video memory (GTX1070, RTX2070, RTX2080) previously available only for GTX1080ti and RTX2080ti. Starting mining with 8Gb will only work on Linux and Windows 7, Windows 10 is currently not available due to the use of more video memory. The transition from Cuckaroo29 to Сuckatoo31 is more than justified, because the GTX1070 video card on the Cuckatoo31 algorithm yields a yield of 70% more than on Cuckaroo29. The simplest solution for farm owners on Windows 10 is to switch to HiveOS (up to 3 rigs for free) or MinerBabeOS (1% commission). Download the miner on Bminer.me

Gminer 1.32 - increased hashrate for Cuckaroo29 and AMD support for Beam

In the current version 1.32, Gminer slightly increased mining performance using the Cuckaroo29 (GRIN) algorithm, delivering 0.1-0.2Gps more than its competitor Bminer. Also added is the possibility of mining BEAM on AMD video cards (Equihash 150/5 algorithm). Gminer is a closed miner with a commission of 2%, which can be downloaded from the official Bitcointalk forum.

Bminer 14.2.0 - 0.9GPS cuckatoo31 (GRIN) hashrate on the GTX1080ti video card

In the latest version of Bminer 14.2, developers have added support for the Cuckatoo31 algorithm for the Nvidia GTX1080ti and RTX2080ti video cards in an experimental mode that requires at least 11Gb of video memory. Start mining GRIN on this algorithm is now obtained only under Linux OS. At the same time, the hashrate of video cards is significantly higher than that of the Gminer competitors, 0.9Gps instead of 0.6GPS. But Gminer in version 1.31 allows you to run mining on the Cuckatoo31 algorithm already with 8Gb of video memory. Download the latest version of bminer on the Bminer.me website.

Gminer 1.30 - plus 5-7% performance on the algorithm Cuckaroo29 (GRIN)

As usual with the emergence of new mining algorithms, the creators of various miners begin to intensively optimize their software to improve the performance of video cards in mining and at the same time luring most of the miners from their competitors to their side. With the advent of the GRIN cryptocurrency on the Cuckaroo algorithm, several developers were involved in the race for miners: Bminer, Gminer, NBminer, Lolminer and others. The last word in this confrontation was said by the Gminer developers with version 1.30, offering an increased hashrate of 5-7%, compared with the previous version, when mining GRIN on Nvidia video cards. Download the latest version of Gminer on the Bitcointalk forum.

T-Rex 9.2 - X16rt Algorithm Support (GIN)

The popular T-REX multiminer for Nvidia video cards has been updated to version 9.2, which added support for the X16rt algorithm for mining GIN cryptocurrency, which will soon change the Lyra2z algorithm to X16rt. At the moment, GIN is testing a new algorithm in its test network, to which you can also connect and test your farms at work on the X16rt algorithm. T-Rex takes a commission of 1% for all available 23 mining algorithms, you can download the latest version for Windows or Linux on Bitcointalk

TeamRedminer 0.3.1 - support for Lyra2Rev3 algorithm for AMD video cards

TeamRedMiner is a specialized multi-miner for AMD video cards. The latest versions in the miner added support for the Lyra2Rev3 algorithm for mining Vertcoin after hard fork on February 2, 2019. In addition to the Lyra2Rev3 algorithm, the miner supports the following algorithms: PHI2, Lyra2z, and CryptonightV8. TeamRedMiner is software with closed source code and a commission of developers: 2.5% (Lyra2Rev3, CryptonightV8), 3% (PHI2, Lyra2z). You can download the latest version of the miner on the Bitcointalk forum.

Hashrate AMD video cards on Lyra2Rev3 algorithm:

NBMiner 14.0 - GRIN support and hashrate increase by 200% Bytom for Nvidia RTX video cards

NBminer to the 14th version got support for the mining of GRIN cryptocurrency with a hash rate at the level of the fastest miners Gminer and Bminer. But this is not the most important thing in this update, because the miner’s developers managed to raise the hashrate of Nvidia video cards by 200% when mining Bytom cryptocurrency, but only for the latest generation RTX video cards with tensor cores and Ray Tracing blocks.

For example, the RTX2080 video card currently produces 12000H/ s on the Bytom (BTM) algorithm, and the GTX1070Ti is only 3400H/s.

CCminer Tpruvot 2.3.1 - Lyra2Rev3 algorithm support for Vertcoin mining

February 2, 2019 in the Vertcoin cryptocurrency network will happen hardfork with a change in the mining algorithm from Lyra2Rev2 to Lyra2Rev3. Using the latest version of ccminer Tpruvot 2.3.1, owners of Nvidia video cards will be able to prepare for this transition in advance, in order to get the maximum benefit in the first hours of the Vertcoin hard forks. In addition to Lyra2Rev3, 3 more algorithms were added: sha256q, exosis, blake2b.

Sgminer djm34 fork - fast AMD miner for MTP algorithm

For mining Zcoin cryptocurrency is used a little-known mining algorithm MTP, which is supported by well-known miners CryptoDredge (Nvidia) and WildrigMulti (AMD). But besides these miners, there is also a fork of the open miner sgminer from djm34 with code optimization for the MTP algorithm, which offers improved performance on this algorithm up to 50%, but only for AMD video cards. The sgminer fork from djm34, like the sgminer itself, is offered as open source with the ability to compile for any OS. Already compiled miner on GitHub can be downloaded only for Windows. At the moment there are two versions of the kernel for video cards RX580 and older, as well as a kernel called Vega with higher performance.

LolMiner 0.7 - BEAM mining on GTX1060 3GB and R9 280x video cards

Lolminer is so far the only miner that allows the use of video cards with 3Gb video memory in the mining cryptocurrency Beam, which include the popular GTX 1060 3Gb miners and the almost forgotten legends R9 7970, R9 280x and their analogues. And the old AMD R9 from 2012 is not only nominally able to mine the Beam cryptocurrency, but also generate income from such mining even considering their high power consumption. Lolminer will be appreciated not only by the owners of "vintage" AMD video cards, but also by the owners of modern AMD RX video cards for the high hash rate comparable to Nvidia video cards.

Gminer 1.23 - fast alternative miner for GRIN and BEAM

Gminer, like Bminer, supports the mining of GRIN and BEAM, but with a slightly smaller hash rate, however, according to our observations, this miner is more stable and suitable for those who have problems with the work of their rigs on Bminer. Gminer also has two versions for Linux and Windows, the commission for using the miner will be 2%.

Possible hashrate of video cards:

Bminer 14.0.0 - improved hash rate for GRIN and Aeternity

In the last 14 versions, Bminer increased its productivity during the extraction of GRIN and Aeternity by 5-10%. In addition, the reduction of rejects and a more accurate display of the hashrate in the miner are stated. For GRIN and Aeternity Bminer, you can only use Nvidia graphics cards. The miner also supports other types of Equihash, Ethash and Beam  mining. Bminer developers offer two versions for Linux and Windows on their Bminer.me website for download.

Heshrate video cards in the current version of Bminer 14.0.0:

Gminer 1.21 fast Equihash and Cuckaroo29 miner for Nvidia video cards

Gminer was one of the first to introduce support for the Equihash 150.5 algorithm for mining Beam, so when running the sensational cryptocurrency GRIN, they did not stand aside and released their version of the miner with the support of the Cuckaroo29 algorithm. In the current version 1.21 the miner's productivity on this algorithm was increased by 29%, but still it is inferior to Bminer by 5-10% during mining at GRIN.

Bminer 13.0.0 - plus 30% while mining GRIN and Aeternity

Bminer in the new version 13, improves its performance when mining GRIN and Aeternity by 30%, thus confirming its status as the fastest miner for GRIN cryptocurrency when mining on Nvidia video cards. It should be noted that for newer Nvidia generation RTX20x0 video cards, the developer recommends using the previous version 12.2.0.

Mining Grin cryptocurrency on video cards with 4GB video memory

While GRIN's cryptocurrency remains in the top in terms of the mining profitability to it, the interest of the miners dont die out. While many owners of video cards with 6Gb video memory managed to switch to GRIN mining and grab their chunk of profit, all this time the owners of video cards (GTX1050ti, R9 380, RX550, RX560, RX470, RX570, RX480, RX580) c 4GB of video memory were outside this holiday. Next, we will explain how to enable video cards with 4 gigabytes of memory in the Grin mining on the Cuckaroo29 algorithm.

Bminer 12.1.0 - the fastest miner for cryptocurrency GRIN

Cryptocurrency Grin, which started just two days ago, has already managed to make a fuss because of its profitable mining. In the past, the material on this cryptocurrency "GRIN cryptocurrency - list of available miners and pools" we simply listed the available mining programs and open pools for cryptocurrency GRIN. During these two days we had time to check all available miners and select the most "profitable" ones. As a result, Bminer version 12.1.0 showed the highest results in mining GRIN.

GRIN cryptocurrency - list of available miners and pools

The new GRIN cryptocurrency attracted attention by the fact that it is the classic POW cryptocurrency without a pre-mine, without Founders Reward , masternodes, POS and ICO. And the comic name brings even closer to such a bright representative of Dogecoin, from 2013. Unlike the Dogecoin cryptocurrency, GRIN does not imply a decrease in the block reward over time, i.e. Now for each block, miners are given 60 GRIN coins, and this value will be constant. Thus the offer of coins will not be limited as it is made for Bitcoin at 21 million coins. The mining algorithm for GRIN was chosen by Coocko Circle, as in Merit and BITC, but with different parameters (Coockaroo29), which is why the designed miners for MERIT and BITC are not suitable.