Mining soft

Bminer 14.0.0 - improved hash rate for GRIN and Aeternity

In the last 14 versions, Bminer increased its productivity during the extraction of GRIN and Aeternity by 5-10%. In addition, the reduction of rejects and a more accurate display of the hashrate in the miner are stated. For GRIN and Aeternity Bminer, you can only use Nvidia graphics cards. The miner also supports other types of Equihash, Ethash and Beam  mining. Bminer developers offer two versions for Linux and Windows on their Bminer.me website for download.

Heshrate video cards in the current version of Bminer 14.0.0:

Gminer 1.21 fast Equihash and Cuckaroo29 miner for Nvidia video cards

Gminer was one of the first to introduce support for the Equihash 150.5 algorithm for mining Beam, so when running the sensational cryptocurrency GRIN, they did not stand aside and released their version of the miner with the support of the Cuckaroo29 algorithm. In the current version 1.21 the miner's productivity on this algorithm was increased by 29%, but still it is inferior to Bminer by 5-10% during mining at GRIN.

Bminer 13.0.0 - plus 30% while mining GRIN and Aeternity

Bminer in the new version 13, improves its performance when mining GRIN and Aeternity by 30%, thus confirming its status as the fastest miner for GRIN cryptocurrency when mining on Nvidia video cards. It should be noted that for newer Nvidia generation RTX20x0 video cards, the developer recommends using the previous version 12.2.0.

Mining Grin cryptocurrency on video cards with 4GB video memory

While GRIN's cryptocurrency remains in the top in terms of the mining profitability to it, the interest of the miners dont die out. While many owners of video cards with 6Gb video memory managed to switch to GRIN mining and grab their chunk of profit, all this time the owners of video cards (GTX1050ti, R9 380, RX550, RX560, RX470, RX570, RX480, RX580) c 4GB of video memory were outside this holiday. Next, we will explain how to enable video cards with 4 gigabytes of memory in the Grin mining on the Cuckaroo29 algorithm.

Bminer 12.1.0 - the fastest miner for cryptocurrency GRIN

Cryptocurrency Grin, which started just two days ago, has already managed to make a fuss because of its profitable mining. In the past, the material on this cryptocurrency "GRIN cryptocurrency - list of available miners and pools" we simply listed the available mining programs and open pools for cryptocurrency GRIN. During these two days we had time to check all available miners and select the most "profitable" ones. As a result, Bminer version 12.1.0 showed the highest results in mining GRIN.

GRIN cryptocurrency - list of available miners and pools

The new GRIN cryptocurrency attracted attention by the fact that it is the classic POW cryptocurrency without a pre-mine, without Founders Reward , masternodes, POS and ICO. And the comic name brings even closer to such a bright representative of Dogecoin, from 2013. Unlike the Dogecoin cryptocurrency, GRIN does not imply a decrease in the block reward over time, i.e. Now for each block, miners are given 60 GRIN coins, and this value will be constant. Thus the offer of coins will not be limited as it is made for Bitcoin at 21 million coins. The mining algorithm for GRIN was chosen by Coocko Circle, as in Merit and BITC, but with different parameters (Coockaroo29), which is why the designed miners for MERIT and BITC are not suitable.

Bminer 12.0.1 - GRIN mining support, hashrate increase on BEAM algorithm

Among the new actively developing miners, Bminer with support for Nvida and AMD video cards can be distinguished. Earlier, we already wrote that Bminer can offer the mining instruction Ethereum and Bytom mining cryptocurrency. In addition to these algorithms, mining is supported by Equihash, Zhash algorithms. The latest version of Bminer 12.01. increased performance by 100% for the BEAM algorithm, as well as added support for the new GRIN algorithm (for AMD video cards only). For Nvidia video cards, GRIN support is claimed only in experimental mode. Bminer is a closed source miner with a commission ranging from 0.65% (ethereum) to 2% (bytom, zcash). You can download the miner on the official website of Bminer.me.

Ethereum ProgMiner - support for the ProgPow algorithm on AMD and Nvidia video cards

With the advent of rumors about the transfer of Ethereum cryptocurrency to the PROGPOW mining algorithm, the interest of miners and programmers to this algorithm has sharply increased. On this wave, ProgPow began to be introduced into already known miners, as well as new projects focused on the new mining algorithm. One of these projects is the miner Ethereum ProgMiner, available for public download from January 10, 2019. A distinctive feature of this miner is the support of two OpenCL and CUDA libraries at once. This is a universal miner for AMD and Nvidia graphics cards.

GMiner 1.16 - Equihash 150.5 (Beam) support on Nvidia video cards

Gminer software has existed since September 2018 and has already managed to grow to version 1.16, although this product has come to our attention only now. A distinctive feature of Gminer is the support for mining various variations of the Equihash algorithm, including the increasingly popular Equihash 150.5 for mining the cryptocurrency BEAM. To date, Gminer can offer the maximum hashrate when mining BEAM. Other variations are also supported: Equihash 96.5 (MinexCoin), Equihash 144.5 (Bitcoin Gold, BitcoinZ, SnowGem, SafeCoin, Litecoin Z), Equihash 192.7 (Zero, Genesis), Equihash 210.9 (Aion).

CryptoDredge 0.16.0 with X16RT and Lyra2zz algorithms support

The latest version of the CryptoDredge 0.16.0 NVIDIA GPU miner adds support for the new X16RT algorithms, which is used to mine the newly launched Veil coin, and Lyra2zz, used for mining LAPO. In addition, the latest version has improved production stability on the MTP algorithm, which is used by the Zcoin project (XZC) . If you are currently using any other miner for mining Veilor XZT, then CryptoDredge 0.16.0 may be of interest to you, since it is quite stable and has excellent performance for these algorithms. As a rule, it shows itself better than its competitors, not to mention the fact that at the moment it is the fastest miner for the X16RT algorithm.

New Bminer 11.3.0 release with dual mining BTM+ETH support

The latest version of Bminer 11.3.0 has added support for Dual Mining mode for BTM / ETH, similar to how it was done in the NBMiner 12.0 miner earlier. It is worth noting that the previous version of Bminer previously had support for the dual-mining mode, however, a pair of BTM + ETH appeared only in this version. Remember that Bminer still does not support all pools for mining (for example, does not support Antpool), so when using a miner, make sure that you use a supported pool, for example f2pool, to avoid problems and get optimal performance from a new miner in single or double mining modes.

T-REX 0.9.1 mining support X16rt (Veil) and SHA256Q (Pyrite) algorithms on Nvidia video cards

Multiminer for Nvidia  video cards promptly released a new version to support mining a new, but already had time to make quite a bit of noise in the VEIL cryptocurrency network using the X16rt algorithm. As a small bonus, support for another Pyrite cryptocurrency on the new SHA-256Q algorithm is also announced. In addition, developers will please the owners of Nvidia video cards with increased performance on the already popular algorithms X16r, X22i. BCD. As before, T-rex is a closed miner with a commission of 1%. You can download T-REX on the official Bitcointalk forum. 

CryptoDredge 0.14 new algorithm lyra2Rev3

Today received an update to version 14, another well-known Nvidia multiminer CryptoDredge. In the current version, CryptoDredge has received support for the new mining algorithm Lyra2Rev3. In the previous version 13, which we did not cover, the new algorithms X21S and Lyravc0banHash were also added. To keep up with the competitors, the developers also optimized their miner to increase the hashrate on the X22i, Skunkhash algorithms. Download the latest version of the miner CryptoDredge on the Bitcointalkforum.

Z-enemy 1.27 - improved performance for x16, HEX, BCD and other algorithms

Nvidia multiminer Z-enemy continues to develop intensively, offering with each new version of the increasing performance in mining. In the current version 1.27, the performance of X16s / r is improved by 3-4%, by 6-8% for BCD and by 1-3% for other algorithms (x17, bitcore, c11, sonoa...). Z-enemy is a miner for Nvidia video cards with a closed source code and a commission of 1%, you can download the latest version of the miner on the Bitcointalkforum.

T-REX 0.8.4 - added X22s algorithm and improved performance on X22i

The T-REX multi-miner for Nvidia last week released two updates 0.8.3 and 0.8.4 in which the X22s mining algorithm was added for mining Ritocoin cryptocurrency, the latest version also increased the hashrate for the already popular X22i algorithm by 1-4%. As before, T-REX is distributed as a miner with closed source code and a built-in developer commission of 1%. You can download T-Rex multiminer for Windows and Linux on the Bitcointalkforum.

CPUminer-opt 3.8.8.1 - mining on the CPU, supports 70 algorithms

We rarely talk about mining cryptocurrency on central processors due to low interest miners, since good results in mining show only quite expensive CPUs, which still significantly lose to video cards at a price per hash. Therefore, in mining rigs, processors of the initial maximum of the average level are used to support the work of video cards, but not as for independent mining. For mining enthusiasts or for owners of a large number of CPUs, it will be interesting to learn that there are specialized miners for CPUs with support for 70 mining algorithms! CPUminer-opt is just such a unique product with the help of which you can mining almost any cryptocurrency you like on your CPU. CPUminer-opt has a long history of growing from 2016 to version 3.8.8.1.

CryptoDredge 0.12.0 added Pipe and Dedal algorithms

Programmers developing various mining software do not seem to be in the know or do not share the general mood about dying mining cryptocurrencies,  so the high activity on the release of new versions of miners on the contrary only increases. The developers of CryptoDredge multiminer are not far behind these trends. The current version of the miner 0.12.0 differs from  0.11.0 in that now with the help of the miner CryptoDrerdge, owners of Nvidia video cards will be able to participate in the mining of NUMUS cryptocurrency (Dedal algorithm) and UOUCoins (Pipe algorithm). In total, CryptoDredge supports 31 mining algorithms on Nvidia video cards with CUDA 5.0 and later support. You can download the latest version of the miner on the Bitcointalk forum.

WildRig Multi 0.13.3 - added X18, Dedal and Aergo algorithms, mining optimization on other algorithms

WildRig Multi multiminer for AMD video cards has been updated to version 0.13.3. Starting from version 0.12.9, the miner has got support for new mining algorithms - X18, Dedal and Aergo. Also during this time, performance has been improved for algorithms X16, X17, HEX and X22i. Today WildRig Multi supports 21 different mining algorithms on video cards starting from R9 290 and newer. WildRig algo 0.13.3 is currently available only for Windows. The previous version 0.13.2 without the support of the Dedal algorithm can be downloaded for Windows, Linux and HiveOS. Download miner WildRig Multi on the Bitcointalk forum.

T-REX 0.8.2 - added Dedal algorithm and improved performance on the X22i algorithm

During the time when we last wrote about the multi-miner T-REX 0.8.0 for Nvidia video cards, two updates 0.8.1 and 0.8.2 have already been released. In the current version 0.8.2, support for the Dedal algorithm for mining NUMUS cryptocurrency has been added. For the X22i algorithm, for the last two versions, the performance of Nvidia video cards has grown significantly by more than 20%. T-REX 0.8.2 has got another useful feature - it is an automatic update, it is enabled via the monitoring page. For auto-updates to work, you need to use Watchdog with the auto-update flag enabled. T-REX is a closed source miner that supports 21 different mining algorithms. Windows and Linux versions are available for download on the Bitcointalk forum. Commission for using miner T-REX 1%.

Z-enemy 1.25 - the next optimization of the popular multiminer for Nvidia video cards

The Z-enemy multiminer in the next version 1.25 can offer increased hashrate up to 10% for RTX video cards and up to 3-7% for GTX video cards. Also in this version it was possible to reduce the load when mining on the CPU, if your CPU in previous versions was loaded to the maximum, then from upgrading to version 1.25 you will get the maximum performance boost. As before, Z-enemy is distributed as a miner with a closed source code and a commission of 1%. Available for download versions for Windows, Linux and various Cuda Toolkit (9.0, 9.1, 9.2, 10.0) You can download the latest version of the miner z-enemy on the Bitcointalk forum.