Mining software

New SRBMiner 1.6.7 CryptoNight AMD miner with Binary Kernels

New SRBMiner 1.6.7 CryptoNight AMD miner with binary kernels The last update of the AMD GPU miner for the CryptoNight algorithm - SRBMiner added some binary kernels, which allows the miner to boot faster on some popular AMD GPUs, rather than compiling the kernels every time the software is started. Binary kernels also solve problems with drivers version 18.7 or newer. Precompiled binary cores are available for the following AMD GPUs: Vega 56, Vega 64, Vega FE, RX 470, RX 480, RX 570, RX 580.

New Bminer 10.2.0 with Wider Equihash 144,5 support

New Bminer 10.2.0 with Wider Equihash 144,5 support Last big update BMiner 10.0.0 added mining support on the algorithm Equihash 144,5, хalthough it was limited only to the possibility of mining on Zhash (Bitcoin Gold - BTG). However, the latest update 10.2.0 opens the possibility of mining any of the Equihash 144.5 coins, using the command line parameter "-pers", setting the coin you want to mine.

The new version of NebuTech BTMiner 8.0 for Bytom (BTM) mining with better performance

Новая версия NebuTech BTMiner 8.0 для добычи Bytom (BTM) с улучшенной производительностью The new version of NebuTech BTMiner 8.0 for Bytom (BTM) mining again claims to be the fastest miner for BTM mining. In the latest version, the hashrate has been increased by 10-15% compared to the previous release. Recall that NebuTech BTMiner is software with closed source code for mining on the NVIDIA GPU with binaries available for Windows and Linux and a built-in 3% developer commission. The complete list of changes in the new version of NebuTech BTMiner 8.0 is available below, but in our opinion it is the improved performance that is the most important of them.

Available new fast ccminer spmod-fork for Raven X16r/X16s

Доступен новый быстрый ccminer spmod-форк для Raven X16r/X16s Another update fork ccminer from spmod with support for X16R / X16S algorithms for mining Raven (#8 source code). The new version increases the performance for X16R and X16S by 5-7% regarding the previous version of the miner. Spmod got an excellent competitive solution, especially given open source, although the z-enemy 1.16, released a few days ago, seems still a little faster.

PHI2 GPU miners for AMD with close and open source available

Closed and open source PHI2 GPU miners for AMD available If you are interested in LUXcoin (LUX) mining on AMD video cards, then you are probably upset that for the PHI2 algorithm used to mining this coin, there are not so many software-miners, not to mention that this algorithm is dominated by NVIDIA. Nevertheless, the developers are working to ensure that the AMD GPUs can also show decent performance on the PHI2 algorithm. Currently, for owners of rigs based on AMD GPU there are two solutions. The first is a fork sgminer-phi2-fancyIX with support for PHI2 and open source and the second one is a miner for Windows - zjazz AMD miner with a closed source code. The second option is slightly faster than the first, but has a closed source code.

New T-Rex 0.6.1 Nvidia GPU Miner for Windows and Linux

New version of T-Rex 0.6.1 Nvidia GPU Miner for Windows and Linux The T-Rex miner is gradually becoming an increasingly popular solution for the production of crypto-currency due to the number of supported algorithms, good performance in most of them and ease of use. In the new version of T-Rex 0.6.1, two new algorithms have been added - Bitcore and Sonoa, as well as a slightly improved hashed on all supported algorithms except Lyra2Rz.

Updated z-enemy 1.17 Nvidia GPU Miner with improved performance

Updated z-enemy 1.17 Nvidia GPU Miner with improved performance There was another update of the zealot / enemy-1.17 (z-enemy), which added support for new mining algorithms, as well as increased performance on some algorithms. The new version of the miner has a significant performance gain (5-10%) for X16R, X16S, XDNA (HEX), X17, Bitcore (BTX), C11, Sonoa, Renesis and Aergo. Chippest video cards such as GTX1050 and GTX 1060 should also receive a few percent of additional performance in the mining. It is also worth noting that the latest version of the miner is now much less dependent on the frequency of the video memory and allows you to start the production process with memory frequencies up to -500 MHz without loss in performance.

WildRig - the new universal miner with Wild Keccak algorithm

miner wildrig amd nvidia keccak With the gradual replacement of video cards with improved devices on Asiq chips, the developers of Linux software increasingly began to pay attention to new or not popular algorithms for which there are not yet asik miners. One of the long-existing, but unpopular algorithms can be called Wild Keccak, on which there are only two crypto currency Boolberry (BBR) and PURK. For this, the Algo developed a new miner for AMD and Nvidia video cards called WildRig. In the current version of 0.10.3 WildRig offers slightly higher performance for Nvidia graphics cards than other competing products. For AMD graphics cards, the WildRig hash is comparable to other miners supporting this algorithm. The software presented has a closed source code and takes a commission of 2% of your hashed. You can download the miner on the official thread of the Bitcointalk forum, where developers offer compiled versions of the miner for Windows, Linux and HiveOS.

NVidia ccMiner fork with KeccakC support for CreativeCoin mining (CREA)

NVidia ccMiner форк с поддержкой KeccakC для добычи CreativeCoin (CREA) We present for your attention the fork ccMiner based on the alexis78 code, but with the support of the new KeccakC algorithm (source code), which is used to extract CreativeCoin (CREA).

AMD Radeon 17.10.2 drivers add support for up to 12 GPUs for Windows10

Драйвера AMD Radeon 17.10.2 All new drivers, starting with AMD Radeon Software Crimson ReLive Edition 17.10.2 now support up to 12 GPUs on a single system running Windows 10. In addition, the new drivers now have the option GPU Workload.

Mkxminer - new optimized Lyra2rev2 miner with Asm core for AMD GPU

A new miner for Lyra2rev2 algorithm with closed source code, which works with video cards from AMD, was released. Miner Mkxminer should improve the performance of mining for AMD GPU owners, to the same level as the mining rigs based on NVidia graphics cards. Mkxminer is compatible with the latest AMD graphics processors, such as the Radeon 200 series or newer, including support for the latest Vega GPUs (Vega does not yet have ASM cores). For those GPUs for which the kit has ASM cores, the production performance will be really good.

The new version of the software to monitor and manage miners: Awesome Miner 2.0

The new version of the software to monitor and manage miners: Awesome Miner 2.0 We would like to tell you about a great program for the monitoring and management of mining reegs miners, and ASIC: Awesome Miner 2.0. This program for Windows allows you to manage multiple reegs and monitor their work process. Awesome Miner 2.0 even has an automatic switching function, based on the profitability of a cryptocurrency. The program supports the following miners: cgminer, bfgminer, sgminer, ccMiner, CpuMiner-opt и Claymore's Dual Ethereum miner; It supports all popular algorithms of mining, such as: SHA-256, SHA-3, Scrypt, Scrypt Adaptive N, X11, X13, X15, Nist5, Groestl, NeoScrypt, Lyra2RE, Lyra2REv2, qubit, Quark, WhirlpoolX, Blake 2b, LBRY, Decred and Ethash. The most advanced version of the program is able to manage up to 5000 miners, from a single user interface.

New ccMiner 1.8.3-git tpruvot with improved LBRY support

New ccMiner 1.8.3-git tpruvot with improved LBRY support A small update for the Windows binary, compiled using the latest version of the ccMiner 1.8.3-git tpruvot source (source code), in which there is some improvement in production efficiency algorithm LBRY, through the use of the code of Alexis Provos.

Mining soft